Skip to main content Skip to footer

Automated
cleaning.

Let the system clean conveyors, fillers and spiral freezers. Up to 50% less water and up to 80% less manual labour.

Set it up once.
It cleans the same way, every time.

Fixed nozzles and a programmed sequence clean the line on their own. Your team is free for the work that needs a person.

Main Station in production

Conveyors and shackles

Nozzles along the line clean the belt or the shackles while they run.

Operator at a Satellite

Fillers

Compact nozzle setups reach into the machine without taking it apart.

Foam on production equipment

Spiral freezers

Rinse, foam and disinfect the whole drum on a timed programme.

The programme.

The same four steps every cycle, run by the system. You set the times once.

Pre-rinse

Fixed nozzles rinse loose soil off the belt or out of the machine.

Water only

Foam

Foam is sprayed through the same nozzles and clings to every surface.

Chemical 1

Dwell

The programme waits while the foam works. Nobody has to stand by.

Set per zone

Rinse and disinfect

A final rinse, and disinfection where the process requires it.

Chemical 2 or 3

Acid wash

An acid foam replaces the alkaline one. It dissolves the limescale and mineral film that daily cleaning leaves behind, so surfaces stay smooth and easy to clean.

1–2×per week

Products for automated cleaning.

Automatic Main Stations and Automatic Satellites, on the same platform as our manual systems.

Automatic Main Stations

Wall-mounted stations with a built-in pump and a controller that runs the programme.

See the range ›

Automatic Satellites

Automatic cleaning points with a controller, supplied by a Main Station or Booster.

See the range ›

Boosters

Pressurised water for many cleaning points, so several people clean at the same time.

See the range ›

Accessories

Nozzles, hoses and fittings to complete the line.

See the range ›

Alpma Sulbana · Since 2009

“We installed our first Foamico products almost 10 years ago and the original equipment is still going strong.”

Joseph Lincicum, Alpma Sulbana

Read the story

Service that
keeps you running.

Our equipment is built to be low maintenance and easy to service. The block, the main part of every station, can be swapped in minutes, so cleaning never waits for a repair.

Help one call awayA network of trained partners across the world.

Swap the blockA station is fully operational again within minutes.

Trained distributorsMaintenance can be carried out locally, on every product.

Questions about
automated cleaning

Can't find your answer?

Call +45 2250 3900.

Conveyors, shackles, fillers, spiral freezers and other equipment where the same surfaces are cleaned every day.

Up to 50% less water and up to 80% less manual labour, depending on the line and the programme.

Yes. Automatic Satellites connect to a Main Station or Booster, so automatic and manual cleaning share the same supply.

Photos or a drawing of the line, the size of the area to clean, your water supply and the chemicals you use. We take it from there.

Not sure what your plant needs?

Let’s automate your line.